HVAC Installation in Simi Valley, CA
Air Force AC and Heating offers HVAC installation in Simi Valley, CA, for both residential and commercial customers. We make sure your system fits your space, adjust the airflow in each room, and check the ductwork for balanced heating and cooling. Our NATE-certified team installs heat pumps, central AC, and furnaces, and we help with permits and startup testing. You’ll enjoy steady temperatures and reliable performance.
Simi Valley HVAC Installer For Residential and Commercial
Air Force AC and Heating is a trusted local HVAC installer for homes, offices, and retail spaces in Simi Valley. We schedule installations to fit your household, tenants, or business hours. Our team uses drop cloths, protects corners, and keeps the area clean throughout the job.
For homes, we focus on bedroom comfort, quiet operation, and neat line routing to the outdoor unit. For businesses, we handle rooftop access, curb adapters, proper drainage, and steady temperatures in customer areas. We also check panel capacity, disconnect placement, gas line sizing if needed, and schedule inspections with the city. Call 805-409-9010 to book your HVAC installation.
Reliable HVAC Installers Near Me
If you’re looking for HVAC installers near you in Simi Valley, Air Force AC and Heating can help plan your installation. We provide a schedule and work plan, and we ensure walkways remain safe throughout the job. We also serve Moorpark, Thousand Oaks, and Westlake Village, covering zip codes 93063, 93065, and 91360.
Phone: 805-409-9010
Address: 2628 Lavery Ct Ste 401, Thousand Oaks, CA 91320
Here's what our satisfied customers are saying...
What to Expect During HVAC Installation in Simi Valley
If your AC or heater is old, you want an installation that lets you keep using your home while we work. You also want to know which decisions you’ll make and which our crew will handle.
Most jobs begin with a site visit, followed by a written estimate and a scheduled install date. On installation day, we remove the old equipment, set the new indoor unit, and place the outdoor unit on a level base with neatly routed lines. Air Force AC and Heating assigns one on-site lead as your main contact, and we finish with a walkthrough to show you the filters, shutoffs, and controls.
In-Home Visit and Equipment Selection
You point out rooms that get hot early or where noise is an issue. We measure your space, determine where the indoor unit will go, and ensure your electrical system can handle the new equipment.
When homeowners in Simi Valley call for installation or replacement, we compare heat pump options with AC and furnace systems using SEER2 and HSPF2 ratings. We also make sure the air handler or furnace cabinet fits your space. You’ll get model numbers, a detailed work scope, and a written layout for placement.
Installation Day Schedule and Home Preparation
Our crew begins by protecting your floors and setting up tools, then removes the old unit and installs the new equipment. Next, we handle refrigerant lines, electrical disconnects, and drainage. We clean up and vacuum the area before finishing. The schedule may change if the closet is tight or if the outdoor spot needs a new base.
Keep the driveway open for equipment delivery and clear the indoor path to the unit location. HVAC installers in Simi Valley also need pets secured and quick access for the final walkthrough.
Start-Up Testing and Final Walkthrough
We check voltage and amp draw, confirm the refrigerant charge with superheat or subcooling, and measure the temperature difference across the coil. We also test the condensate flow and float switch to prevent water backup.
Before we finish, we’ll provide the filter size, the recommended MERV range, the model and serial numbers, and the steps for warranty registration. We’ll also show you how to use the thermostat, where the breaker labels are, and the disconnect location.
Type of HVAC Installation We Offer in Simi Valley
Homes and small businesses in Simi Valley need different HVAC setups. A single system can cool one floor, heat a back room, or cover a small retail space.
Air Force AC and Heating installs AC, heating, heat pumps, and ductless mini-splits. We choose equipment that fits your layout, electrical setup, and indoor space, and confirm the outdoor location and line routing before starting work.
AC Installation
For AC installation, we use matched parts and ensure proper refrigerant routing. We connect the outdoor condenser to the indoor coil with the right-size lines and secure joints, then check for leaks. We also route the drain line to an approved outlet and set the electrical disconnect near the outdoor unit.
Heating Installation
For heating installations, we start by ensuring the indoor cabinet fits and that fuel access is safe. We install the furnace or air handler, confirm shutoff access, and connect venting and return air paths. We check the ignition, temperature rise, and safety controls. You can compare fuel use with AFUE ratings before choosing your equipment.
Heat pump installation provides both heating and cooling with one outdoor and one indoor unit. Since heat pumps move heat like a refrigerator, wiring and breaker capacity are important when choosing a system. We match SEER2 and HSPF2 ratings to your comfort needs and check that both heating and cooling work after startup.
Ductless mini-splits are great for controlling individual rooms, additions, or areas without ductwork. A basic system uses one outdoor unit and one indoor head connected by refrigerant tubing and wiring. Single-zone systems cover one room, while multi-zone setups can support several indoor heads from one outdoor unit if needed.
Heat Pump vs AC and Furnace for Simi Valley Homes
Homes in Simi Valley need strong cooling and lighter heating year-round. A heat pump provides both heating and cooling in one system, while an AC cools and a furnace heats as separate units.
Begin by considering whether your home already uses gas heat or is electric only. Check the condition of your ducts, indoor cabinet space, and electrical panel capacity. Compare ratings properly: SEER2 for cooling, HSPF2 for heat pump heating, and AFUE for furnace efficiency.
- Want one thermostat for heat and cool, and enough panel capacity for a heat pump
- Have gas service and want a hot supply of air on cold nights: AC plus furnace
- Want electric heating most days, with gas backup available: dual-fuel
- Have weak ducts or a room addition that never cools right: ductless mini-splits
Let us know your current setup and main comfort issue. Air Force AC and Heating will review your options for HVAC installation in Simi Valley.
HVAC Replacement vs New Installation
If your HVAC system fails, you remodel, add a room, or expand a business space, you have a choice to make. Replacement means swapping out old equipment and reconnecting to what’s already there, while a new installation adds a system where none existed before. The best option depends on your ductwork, air registers, electrical panel, gas line access, venting, and where the units can fit. Air Force AC and Heating can help you decide what’s right for your property.
| Replacement | New Installation |
| Best fit when: old system fails or is outdated | Best fit when: new space needs heating and cooling |
| Ducts: uses existing ductwork if usable | Ducts: may require new ducts or new runs |
| Power or gas: minor updates are common | Power or gas: new circuits or gas work common |
| Indoor location: same closet or attic spot | Indoor location: new spot must be created |
| Outdoor location: uses existing equipment area | Outdoor location: new pad or mount location needed |
| Permits: changeout permit and inspection | Permits: permit plus new work inspections |
| Cost drivers: equipment match and minor fixes | Cost drivers: ductwork, access, electrical, venting |
| Complexity: lower when ducts and access are ready | Complexity: higher with new routes and build work |
Warranty and Ongoing Care After Installation
- Carrier
- Trane
- Lennox
- Rheem
- Ruud
- Goodman
- Amana
- York
- American Standard
- Bryant
- Daikin
- Mitsubishi Electric
Why Choose Us for HVAC Installation in Simi Valley
You want HVAC Installation in Simi Valley that fits your home, tenants, or business hours. Air Force AC and Heating brings 25+ years of hands-on experience, backed by CSLB license #998040 and insured work. Our team includes NATE Certified HVAC professionals, so you get trained installers for heating and cooling equipment. We keep pricing upfront and focus on the equipment you asked for, with clear options and a scope you can review before the install date.
- 25+ years of experience across installs and replacements
- CSLB license #998040 and insured service for your property
- NATE Certified HVAC professionals on your install crew
- Residential and commercial support, including rooftop package units
- Clear options with a written scope before work begins
Serving Simi Valley and Nearby Areas
Air Force AC and Heating offers HVAC installation in Simi Valley and nearby areas, including replacements and new installs. If your property is near Simi Valley, our team can handle your project from start to finish.
- Simi Valley
- Thousand Oaks
- Moorpark
- Westlake Village
- Camarillo
- Newbury Park
- Oak Park
- Agoura Hills
Schedule HVAC Installation in Simi Valley
Ready to replace an old system or install new heating and cooling? Air Force AC and Heating will help you choose equipment, confirm indoor and outdoor locations, and set your preferred install date. Please have your address, current system type, and main comfort issue ready. Call 805-409-9010 to schedule service in Simi Valley.
Explore Our Other Services